Live - Line Wipes Products

Boom Wipes

Hotstick Cleaner Wipes

Clean & Wax Wipes

Return to Main Page

  End of page

B-1™ Boom Prewash Wipe for Electrical Safety Meet OSHA Live-Line Tool Standard for Boom Maintenance

 

OSHA states that: Booms and other live-line tools "... can become electrically unsafe because of ... a combination of wetting, surface contamination, and a loss of surface gloss ..."

OSHA demands that: "Each live-line tool shall be wiped clean and visually inspected for defects before use each day." 

B-1™ Boom Prewash Wipe satisfies this requirement and offers these features:

• Convenient, Pre-Saturated, Lint-Free Wipe
  
  
• Large and Durable for Maximum Surface Coverage
  
  
• Does Not Remove or Adversely Affect Gel Coat
  
  
• Prevents "Build-Up" over Time
  
  
• Powerful Cleaner Removes Grease, Dirt, Tar, and Grime
  
  
• Removes Road and Sea Spray Salts*
  
  
• Water Soluble for Easy Water Rinsing
  
  
• Designed for One Time Use and Easy Disposal
  
  
• Meets OSHA Maintenance Reg CFR 29 Part 1910

* Salt water is more conductive than fresh water. Rain or foggy mist on a boom covered with salt residue can create a conductive saline coating, adding to the electrical hazard.

 

Catalog No.	Description
B-1	Saturated Wipe in Sealed Foil Pouch

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

Top of page                                                          End of page

S-1™ Hot Stick Cleaner & Water Repellent Wipe Meet OSHA Live-Line Tool Standard for Hot Stick Maintenance

OSHA states that: "A hot stick can become electrically unsafe because of ... a combination of wetting, surface contamination, and a loss of surface gloss ..." and " ... the best defense against accidents is a clean, glossy stick that causes water to bead up ..."

OSHA demands that: "Each live-line tool shall be wiped clean and visually inspected for defects before use each day." 

S-1™ Hot Stick Cleaner & Water Repellent Wipe satisfies this requirement and offers these features:

• Convenient, Pre-Saturated, Lint-Free Wipe
  
  
• Dual Action - Cleans and Applies Water Repellent
  
  
• Does Not Remove or Adversely Affect Gloss Coat
  
  
• Evaporates Quickly
  
  
• No "Build-Up" over Time
  
  
• Prevents Continuous Water Film on Stick in Wet Weather
  
  
• Removes Grease, Dirt, and Grime
  
  
• Designed for One Time Use and Easy Disposal
  
  
• Meets IEEE Maintenance Recommendations (Std #978)

Top of page                                                          End of page

W-1™ Clean & Wax Wipe for Live-Line Tool Maintenance Meet OSHA Live-Line Tool Standard for Hot Stick and Boom Maintenance

OSHA states that: Hot Sticks, booms, and other live-line tools "... can become electrically unsafe because of ... a combination of wetting, surface contamination, and a loss of surface gloss ..." and " ... the best defense against accidents is a clean, glossy stick that causes water to bead up ..."

OSHA demands that: "Live-line tools ... shall be removed from service every two years ... for examination ... and shall be cleaned and waxed ..." 

W-1™ Clean & Wax Wipe satisfies this requirement and offers these features:

• Convenient, Wax-Saturated, Lint-Free Wipe
  
  
• Dual Action Tandem Pack Includes Dry Buffing Towel
  
  
• Superior Quality, Fast-Hazing Fiberglass Wax
  
  
• Suitable for Rubber and Porcelain Materials Too
  
  
• Easy to Apply
  
  
• Does Not Remove or Adversely Affect Gel Coat
  
  
• Leaves Non-Conductive Water Repellent Coating
  
  
• Prevents Continuous Water Film on Stick in Wet Weather
  
  
• Designed for One Time Use and Easy Disposal
  
  
• Meets IEEE Maintenance Recommendations (Std #978)

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

Top of page