Adapt Australia P/L - Ceramic and Glass Insulators



Disc Type Insulators Long Rod Insulators Line Post Insulators Station Post Insulators Pin Type Insulators Lightning Arresters Guy, Strain, Spool, & Strain Type Insulators Solid Core Railway Insulators
End of Page
	Disc Type Insulator The Porcelain Suspension Insulators are mainly used on HV overhead transmission line to support and insulate conductors. The normal type disc insulators are mainly including Standard Type and Fog Type which widely used in the clean areas and pollution areas. We can supply full range of Suspension Insulators to meet IEC, ANSI, BS, AS, and other specifications required by client.
Main Types: 1. Standard Suspension Insulators ANSI C29.2 From ANSI 52-1 to ANSI 52-9; 2. Standard Suspension Insulators IEC 383 (BS 137 & AS1137) From 40 KN, 45KN, 60KN, 70KN, 80KN, 100KN, 110KN, 120 KN, 125KN,160KN, 210KN, 300KN. 3. Fog Type Anti-pollution Insulators From 70KN, 80KN, 100KN, 120KN, 160KN, 210KN; 4. Double Shed Anti-pollution Insulators From 70KN,100KN, 160KN, 210KN
Return to Top of Page
Long Rod Insulator Long rod insulator may be anufactured according to IEC standard, with tension strength from 70kN to 210kN, which is used on 35kV to 500kV lines. 1. Long Rod Insulators to meet IEC 433 SL70BE380,L100BE1000,L160CE1160.
Return to Top of Page
	Line Post Insulators Line Post Insulators can be used to replace the Pin Type Insulators in a position to reinforce the operational voltage and mechanical strength of the Insulators. It is used for insulating and supporting conductors . The are two versions, tie top conductor binding and clamp top with vertical or horizontal mounting. We can supply various Line Post Insulators in accordance with IEC, ANSI, AS Standards Its bending strength is from 3kN to 16kN, Also can design and produce as per customer's drawings.
Line Post including: 1. Line Post Insulator to meet ANSI C29.7 ANSI 57-1, 57-2, 57-3, 57-4, 57-5 2. Vertical and Horizontal Mounting Line Post Insulators to meet ANSI C29.7ANSI 57-11, 57-12, 57-13, 57-14, 57-15 3. Tie-Top and Clamp-Top Line Post Insulators to meet AS 2947.2R11ET150N, R11ET325N:
Return to Top of Page
Station Post Insulators Solid-core station post insulator may be manufactured according to IEC, ANSI,AS standards, with cantilever strength from 4kN to 18kN, which is used on 35kV to 330kV station and substation. There are two types for this series, normal type and anti-pollution type.
	Station Post Insulators including: 1. Solid-Core Station Post Insulators to meet ANSI C29.9TR-202, TR-205, TR-208, TR-210, TR-214, TR-216 to TR-289; 2. Station Post Insulators to meet IEC 273 And AS 1137.3C4(6,8,10)-95(125, 150,170,200, 250, 325, 550,1050);SC-22, SC-22.
Return to Top of Page
	Solid Core Railway Insulators Solid core insulator for electrified railway may be manufactured according to IEC383, BS137, GB standards, which is used on contact net of AV electrified railway with 27.5kV power frequency single phase for insulating and fixing wire. There are two types, wrist arm type and tunnel type with tension strength from 4kN to 12kN.
Return to Top of Page
Pin Type Insulators 1. Pin Type insulators to meet ANSI C 29.2 and ANSI C 29.6; ANSI 55-1 to 55-5 and ANSI 56-1 to 56-4. 2. Pin Type Insulators to meet AS 2947 & AS 3608; AS Class LP.LV, LP/11/180, ALP/11/275, ALP/33/710, SLP/22/420, SLP/33/490;
Return to Top of Page
	Guy Strain Type, Spool Type, Shackle Type Insulators 1. Strain Type to meet ANSI C29.4, 54-1, 54-2, 54-3, 54-4 2. Spool Insulators ANSI C29.3, 53-1, 53-2,53-3, 53-4, 53-5 3. Shackle Insulators to BS 137, ED-1, ED-2, ED-3, ED-4, ED-2(B), ED-2(C), BS1617,BS1618-1,2

Return to Top of Page
Lighting Arrester 1. Porcelain-Housing Surge Arrester: Rated Current: 5KA, 10KA Station Type and Distribution Type. To meet ANSI, IEC standard. 2. Polymer-Housing Surge Arrester Station Type and Distribution Type Standard: IEC 99-4
Return to Top of Page